The Asphalt Softening Point Test Standard Mold (Sample Ring) is used in the Ring-and-Ball method to determine the softening point of asphalt and bituminous materials. It provides a standardized container for preparing and holding asphalt specimens during heating, ensuring uniform shape and accurate, repeatable test results. This mold is an essential accessory for evaluating the temperature sensitivity and high-temperature performance of asphalt in laboratory testing.

Asphalt Softening Point Test Mold

Model:TD606P-M

I. Product Introduction:

The Asphalt Softening Point Test Standard Mold (Sample Ring) is manufactured in accordance with JTD 3410, with reference to ASTM D36/D36M, AASHTO T53, and EN 1427 standards.Widely used in highway engineering construction testing, railway engineering construction testing, building site engineering construction testing, commercial concrete mixing plant testing, building engineering quality supervision testing, and various colleges, universities, research institutions, water conservancy projects, etc.

II. Technical Parameters:

1. Mold Dimensions: 300×150×50 mm

2. Material: Brass

3. Characteristics: High strength, resistant to both high and low temperatures; does not deform within a temperature range of -30°C to +100°C and can be used normally in all conditions.

III. Precautions:

▲ When using the engineering test mold, carefully read the technical instructions, familiarize yourself with the technical specifications, performance characteristics, usage methods, and precautions, and strictly follow the procedures outlined in the instrument's instruction manual.

▲ Personnel using the engineering test mold for the first time must operate it under the guidance of an experienced individual. Independent operation is only permitted after mastering the skills.

▲ The engineering test molds used in experiments should be arranged logically and neatly for easy operation, observation, and recording.